Optical monitoring of single drop microextraction

By -
Single drop microextraction (SDME), the first liquid phase microextraction technique proposed, is a simple approach consisting of the extraction of the target analytes from the sample into a small drop of extractant. The characteristics of the drop, specially its chemical nature and mechanical stability, are key factors to guarantee the success of the extraction. Its chemical composition defines the affinity towards the target analytes which are, in fact, extracted depending on their solubility. The mechanical stability of the drop during the extraction is critical since the drop detachment would ruin the extraction.

The drop volume and handling increase the probability of that detachment. Researchers from Ukraine and Slovak Republic have already published in Analytical Chemistry journal a nice contribution to SDME that overcomes this shortcoming(1). In this case, an optical probe is used as the drop holder in such a way that the continuous UV-Vis monitoring of the drop is achieved. This workflow reduces the drop handling while allows the real time tracking of the process. This approach has been practically evaluated using the determination of sulfite in food samples as model analytical problem.

The extraction is quite simple. First of all, sulfite is in-matrix transformed into sulfur dioxide by the simple addition of hydrochloric acid. Sulfur dioxide is transferred to the headspace of the sample thanks to its inherent volatility and then to the aqueous single drop. The ability of sulfur dioxide to reduce Fe (III) to Fe (II) which finally reacts with 1,10 phenanthroline to form a red complex is used to monitor the process.

We strongly recommend the reading of this article. You will find a detailed explanation of the device, a deep optimization of the variables involved in the extraction and the practical application of the proposal. Do not forget the movie where the extraction is shown.

Reference

(1) Using an Optical Probe as the Microdrop Holder in Headspace Single Drop Microextraction: Determination of Sulfite in Food Samples. Link to the article

Comments

  1. sergyKOctober 14, 2016 at 10:09 AM

    video with a good quality

    https://www.youtube.com/watch?v=-iLGgghl7J4

    ReplyDelete

Post a Comment

Popular posts from this blog

Fabric phase sorptive extraction: a new generation green sample preparation strategy

By -
Image
by Dr. Abuzar Kabir, International Forensic Research Institute, Department of Chemistry and Biochemistry, Florida International University, Miami, Florida, USA Fabric phase sorptive extraction (FPSE), the most recent member of the sorptive microextraction family, has innovatively incorporated both solid phase microextraction (SPME) and solid phase extraction (SPE) techniques into a single technology platform. FPSE utilizes permeable natural/synthetic fabrics e.g., cotton, polyester, fiber glass supports to chemically bind sol-gel hybrid inorganic-inorganic sorbents. A 5 cm2unit of coated fabric (2.5 cm x 2.0 cm) is typically used as the extraction media which can be inserted directly into the sample container. Extraction of the analytes is generally expedited by using a magnetic stir bar to diffuse the analyts into the sample matrix so that rapid mass transfer from the sample matrix to the extraction medium takes place.Once the mass transfer equilibrium between the FPSE media and
Read more

Gold coated magnetic beads for electrochemical detection

By -
Image
This post summarizes an interesting article, recently accepted for publication in Analytical Chemistry, which presents an innovative use of magnetic beads. Researchers from the Osaka Prefecture University at Japan have proposed the synthesis of magnetic microbeads covered with a smooth gold layer that are used for the electrochemical detection of streptavidin (1). The synthesis, which is deeply described in the manuscript, consists of three well defined steps. First of all, the magnetic beads are introduced in a colloidal gold dispersion containing Au-nanoparticles (Au-NPs). Thanks to the opposite zeta potential of both materials (microbeads are negatively charged while Au-NPs present a positive charge), their assembly takes place by electrostatic interactions. However, the Au-NPs are not connected to each other and therefore the electrical resistance of the microbeads is too high. In a second step, the modified microbeads are dispersed in an aqueous medium containing HAuCl 4 as
Read more

Rotating Disk Sorptive Extraction

By -
Image
by Prof. Dr. Pablo Richter, Department of Inorganic and Analytical Chemistry, Faculty of Chemical and Pharmaceutical Sciences, University of Chile. The modern trends in analytical chemistry promote efficiency and green technology in sample preparation. In this context, our research team developed a new technique in 2009 that is capable of extracting pollutants from liquid samples on a rotating PTFE disk with one surface coated with an extraction phase [1]. The disk has embedded a miniature magnetic rod, which allows rotation. We have termed this procedure rotating-disk sorptive extraction (RDSE). RDSE is currently available in two configurations. In the classic version (Figure 1), the extraction phase is a polymeric film adhered to one side of the PTFE disk (configuration 1). In this configuration, polydimethylsiloxane (PDMS), nylon and octadecyl (C18) have been used as the sorptive material for the extraction of low-polarity analytes (Log Kow between 3 and 7) [1-12]. However
Read more