Welcome to microextraction

By R. Lucena -
In the last years, an intensive research has been focused on the development of more sensitive and selective analytical instrumentation. However, the direct analysis of samples is difficult in most of the cases due to the low concentration of the targets, the complexity of the samples and even the incompatibility of the matrix with the instrument. The sample treatment, which is usually unavoidable in the majority of the analytical processes, involves the extraction and preconcentration of the analytes prior to their final instrumental determination. In this context, extraction and microextraction techniques are useful tools for the analysts in their daily work.


This blog has different objectives:
· To present the main fundaments of (micro)extraction techniques in a simple style to an expert and non-expert audience.
· To present the main research advances in the microextraction context.

This blog is dedicated to all the people who are fascinated by Analytical Chemistry in general and microextraction in particular.

Once again, Welcome to microextraction 

Comments

Post a Comment

Popular posts from this blog

Fabric phase sorptive extraction: a new generation green sample preparation strategy

By -
Image
by Dr. Abuzar Kabir, International Forensic Research Institute, Department of Chemistry and Biochemistry, Florida International University, Miami, Florida, USA Fabric phase sorptive extraction (FPSE), the most recent member of the sorptive microextraction family, has innovatively incorporated both solid phase microextraction (SPME) and solid phase extraction (SPE) techniques into a single technology platform. FPSE utilizes permeable natural/synthetic fabrics e.g., cotton, polyester, fiber glass supports to chemically bind sol-gel hybrid inorganic-inorganic sorbents. A 5 cm2unit of coated fabric (2.5 cm x 2.0 cm) is typically used as the extraction media which can be inserted directly into the sample container. Extraction of the analytes is generally expedited by using a magnetic stir bar to diffuse the analyts into the sample matrix so that rapid mass transfer from the sample matrix to the extraction medium takes place.Once the mass transfer equilibrium between the FPSE media and
Read more

Gold coated magnetic beads for electrochemical detection

By -
Image
This post summarizes an interesting article, recently accepted for publication in Analytical Chemistry, which presents an innovative use of magnetic beads. Researchers from the Osaka Prefecture University at Japan have proposed the synthesis of magnetic microbeads covered with a smooth gold layer that are used for the electrochemical detection of streptavidin (1). The synthesis, which is deeply described in the manuscript, consists of three well defined steps. First of all, the magnetic beads are introduced in a colloidal gold dispersion containing Au-nanoparticles (Au-NPs). Thanks to the opposite zeta potential of both materials (microbeads are negatively charged while Au-NPs present a positive charge), their assembly takes place by electrostatic interactions. However, the Au-NPs are not connected to each other and therefore the electrical resistance of the microbeads is too high. In a second step, the modified microbeads are dispersed in an aqueous medium containing HAuCl 4 as
Read more

Rotating Disk Sorptive Extraction

By -
Image
by Prof. Dr. Pablo Richter, Department of Inorganic and Analytical Chemistry, Faculty of Chemical and Pharmaceutical Sciences, University of Chile. The modern trends in analytical chemistry promote efficiency and green technology in sample preparation. In this context, our research team developed a new technique in 2009 that is capable of extracting pollutants from liquid samples on a rotating PTFE disk with one surface coated with an extraction phase [1]. The disk has embedded a miniature magnetic rod, which allows rotation. We have termed this procedure rotating-disk sorptive extraction (RDSE). RDSE is currently available in two configurations. In the classic version (Figure 1), the extraction phase is a polymeric film adhered to one side of the PTFE disk (configuration 1). In this configuration, polydimethylsiloxane (PDMS), nylon and octadecyl (C18) have been used as the sorptive material for the extraction of low-polarity analytes (Log Kow between 3 and 7) [1-12]. However
Read more